How to Replace Door Locks
Replacing the door lock could be a difficult task. It is important to protect your home from intruders, and to change locks if you move in with an occupant change or you are letting out your home.
Most new locks are designed to fit standard door widths. If your door is more thick, you'll require a "thick-door" kit that comes with longer screws and longer tail pieces for the deadbolt.
Removal of the old lock
It is necessary to remove your old lock from the door before you install the new one. This can be done with the help of a few tools, but make sure not to harm the door or frame. Using the right tools will save you from costly repairs in the future.
Remove the screws that hold the handle and trim. This can be done with the help of a screwdriver. Once the screws are removed, you can pry the trim off. Then, you can get to the screw that holds the handle and trim to the door. After removing screw, you can remove the lock cylinder as well as open the handle.
One of the most common indicators that your lock is failing is when you can no longer turn the key inside. This is due to the tumblers wearing out and eventually stopping moving upwards or downwards, which causes the lock to cease to function. If this happens, you'll need to bring the lock to a locksmith in order to be reset-keyed.
Begin by removing the screws holding the faceplate to its place. If your kit doesn't include new screws, you should buy them from a hardware shop. If you're installing a mortise lock you'll also have to remove the screws that hold the external roseplate to the door. After removal of the screws, take off the plate and the dead bolt.
Then, look for a pinhole in the interior handle trim. If you spot one, slip a straightened safety pin into it. You could also try the flat screwdriver against a depression or slot. This should open the lock handle and expose screws which can be removed to remove the entire lock from the door.
Installing the new lock
If you're looking to change your lock following a break-in or simply want to update the look of your door, installing a new lock is relatively simple. It is important to measure your door prior purchasing a lock to ensure that it is suitable. This is particularly important for deadbolts, which require a specific size in order to fit into the strikeplate and bolt pocket. If you're unsure of how to measure, you can get help from your local hardware store or locksmith.
If you're replacing mortice locks, take the centre rail of the lock as a guide for positioning the new mortise lock. Once you've determined the location of the lock, drill holes along the centre line that are the same size of the lock. Then, you can chisel your wood away until you have an area that is rectangular enough to fit the mortice lock. Install the lock and then outline the faceplate using a marking blade. Mark and drill screw holes to secure the faceplate.
You can save money when making rekeys on locks by buying a starter set that includes keys that can be re-keyed and an unlocked key. These kits can be purchased from many online retailers as well as home improvement and hardware stores. They also include instructions to assist you in completing your task.
Make sure to read your lease agreement if you are renting prior to changing locks. You may be required to give your landlord the key to the new locks. You may have to replace the old lock with a standard one if you have to do so. You can purchase a standard lock at your local hardware store, or you can purchase a high-tech smart lock that connects to the Wi-Fi of your home and lets you lock and unlock your door remotely. An ideal choice is a Schlage Smart Lock, which can be used with a variety of door levers and knobs. This lock can be connected to a security hub for your home so that you can receive alerts whenever your door is locked or opened.
Installing the new lock
A damaged lock could pose a security threat, so it is important to replace it as fast as you can. It's a good thing that replacing locks for doors is a quick and easy project that anyone can tackle. The first step is removing the lock that was previously used. This is done by unscrewing the screws that hold it in place and then pulling it out. Depending on the type you have, you might need an Allen wrench or screwdriver. Once you have removed the lock that was previously used take all the parts and store them in a safe place.
Next, install the new lock on the door. Most kits include an example of cardboard that shows how the lock will be fitted onto the door. If the template doesn't fit your door, draw a line with a pencil around it or a chisel for extra material removal. Be sure that the inside latch plate is aligned with the mortise hole after the new lock is installed.
Be cautious not to over tighten the lock when you install it. This can cause the lock to rattle, or even break. If you have a lock that is keyed, ensure that the spindle is aligned with the hole on the knob. If it's not, you can use a screwdriver to push the spindle through the lock and into the knob.
Once you have finished installing the new lock, it is now time to install the decorative base plate that is included with it. If the lock doesn't come with a base plate you can buy one that is compatible with your hardware.
Test the new lock to ensure it functions. This can be done by inserting the lock's key and turning the lock to ensure that it is able to open. If it doesn't work then you must contact locksmith.
Rekeying your locks with an expert can help to prevent burglaries. This process involves changing the internal lock tumblers so that it can no longer accept your old keys. This will make you feel secure and secure at home.
Test the new lock
If you're installing a new lock you want to make sure that it functions as you intended. It is essential to follow the instructions. If you don't follow them, you could not be in a position to open your door. You can contact a locksmith for assistance if you are unsure of what to do. A locksmith can also offer guidance on the best locks for your home.
If you are having trouble opening your lock, it could be an issue with the latch or handle. You can try lubricating the latch with graphite or spraying it with WD-40. This can sometimes fix the problem. However, you might need to replace the latch completely if it's not working correctly.
window and door lock repair is that the lock was installed incorrectly. The door handle clip is usually damaged or missing from the new lock. In this instance, you should grab the handle from the inside and insert a plastic retainer clip. The handle will then be connected to the lock, and the lock will be tested.
After you've changed the lock, it's crucial to test the keypad to be sure that it's functioning correctly. You can test the keypad by inserting it and turning it. If the keypad is working properly, it should unlock and lock your door.
Check the deadbolt to make sure it is working properly. If it's not working, remove the latch from the door and remove the Phillips-head screws. Remove the old deadbolt and replace it with a new one. Orient and load the deadbolt lock in the correct way.
Spindle testing is a different method to test the new lock. It can be performed by inserting a screwdriver into the spindle. This test should be performed before reinstalling the lock to ensure that there aren't any mistakes.